Home     Abou us     Company's business     Service    News     Contact us

Jiangsu BODA NC Complete Equipment Co.,Ltd.
ADD:NO.7 XINYAN EAST ROAD,SHIZHUANG DISTRICT, HUANGTU TOWN,JIANGYIN JIANGSU,CHINA.
TEL:86-510-86659111FAX:86-510-86058600
E-mail:
boda@bodacnc.com

   

Mobile website qr code

WeChat qr code

Search

Keywords:

>
>
The difference between CNC laser cutting machine and plasma cutting machine is obvious

NEWS

CONTACT US

TEL:
86-510-86659333

FAX:86-510-86058600

EMAIL: boda@bodacnc.com

ADD:NO.7 XINYAN EAST ROAD,SHIZHUANG DISTRICT, HUANGTU TOWN,JIANGYIN JIANGSU,CHINA.

The difference between CNC laser cutting machine and plasma cutting machine is obvious

Classification:
FAQ
Author:
Source:
Release time:
2019/12/06 10:20
Page view
Abstract: CNC plasma cutting machine is a new type of thermal cutting equipment. Its working principle is to use the heat of high-temperature plasma arc to make the metal at the workpiece incision locally melt, and use the momentum of high-speed plasma to remove the molten metal to form the incision. 1. With the development of plasma cutting, the available working gas has an obvious influence on the cutting characteristics, cutting quality and cutting speed of plasma arc.
CNC plasma cutting machine is a new type of thermal cutting equipment. Its working principle is to use the heat of high-temperature plasma arc to make the metal at the workpiece incision locally melt, and use the momentum of high-speed plasma to eliminate the molten metal to form the incision.
1. With the development of plasma cutting, the available working gas has an obvious influence on the cutting characteristics, cutting quality and cutting speed of plasma arc. The commonly used plasma arc working gases are argon, hydrogen, nitrogen, oxygen, air, water vapor and some mixed gases.
Plasma cutting machine is widely used in automobile, locomotive, pressure vessel, chemical machinery, nuclear industry, general machinery, engineering machinery, steel structure and other industries!
2. Laser cutting is to use a high-power density laser beam to scan the surface of the material, heat the material to thousands to tens of thousands of degrees Celsius in a very short time, so that the material can be melted or gasified, and then blow the melted or gasified material away from the cutting seam with high-pressure gas, so as to achieve the purpose of cutting the material. Laser cutting, because the invisible beam is used instead of the traditional mechanical knife, the mechanical part of the laser cutter head is not in contact with the work, and will not scratch the working surface in the work; laser cutting speed is fast, the incision is smooth and flat, generally no follow-up processing is required; the cutting thermal impact area is small, the plate deformation is small, the cutting seam is narrow (0.1mm ~ 0.3mm); the incision has no mechanical stress, no shear burr; High precision, good repeatability, no damage to the surface of the material; NC programming, can process any plan, can cut the whole board with large format, no need to open the mold, economic and time-saving.
General introduction: in terms of cutting accuracy, plasma can reach within 1mm, laser can reach within 0.2mm; in terms of cost, plasma cutting machine is much cheaper than laser cutting machine, in terms of processing accuracy, plasma cutting is a rough machining and a fine machining compared with laser cutting!
澳洲幸运10杀码计划 极速时时彩开奖 秒速飞艇技巧 秒速飞艇哪个平台好 极速时时彩 湖南快乐十分开奖 疯狂斗牛 秒速飞艇注册 秒速快三怎么玩 秒速飞艇免费计划